Bosch rexroth MS2N03-A Скачать руководство пользователя страница 12

Страница: 12 / 72

12 / 72

MS2N

Product- and technology-dependent safety instructions

Bosch Rexroth AG

R911347581, Edition 05

2.2

Qualification of personnel

Any work with or on the described product may

only done by qualified or skilled personnel. For

the purpose of this manual, qualified personnel

means persons who are familiar with trans-

porting, installing, mounting, commissioning and

operating the components of the electrical drive

and control system and the associated hazards

and have an appropriate qualification for their

job.
All persons working on, with or in the vicinity

of an electrical system must be informed of the

relevant safety requirements, safety guidelines

and internal instructionsEN 50110-1:2013.

2.3

General safety instruc-

tions

Important! Please read all instructions before

motor installation.
Do not install or operate motors or components

of the electric drive and control system before

you have not carefully read all delivered docu-

ments.
Please observe the particular applicable national,

local and system-specific regulations, the safety

instructions in the documentation and the

warning and informative labels on the motors.
Improper use of the motors and failure to follow

the safety instructions in this document may

result in material damage, personal injury, elec-

tric shock or, in extreme cases, to death!
In the case of damage due to non-observance

of the safety notes, Bosch Rexroth assumes no

liability.
Applications for functional safety are only allowed

if the motors have the SI‑sign on the rating plate.

2.4

Product- and technology-

dependent safety instruc-

tions

2.4.1

Protection from electric

voltage

Work required on the electric system may only

be carried out by skilled electricians. Tools for

electricians (VDE tools) are absolutely necessary.
Before working:

•

Enable.

•

Secure against reactivation.

•

Ensure de-energization.

•

Ground and short-circuit.

•

Cover or shield any adjacent live parts.

After completing the job, cancel the measures in

reverse order.
Dangerous voltage occurs during operation!

Danger to life, risk of injury by electric shock!

•

Before start-up, connect the protective con-

ductors on all electric components according

to the connection plan.

•

Operation, even for short measuring pur-

poses is only allowed with fixed connected

protective conductor on the specified points

of the components.

Содержание rexroth MS2N03-A









































































Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды

Bosch rexroth MS2N03-A, Руководство по эксплуатации

Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды