Bosch Rexroth IndraControl XM21 Скачать руководство пользователя страница 8

Страница: 8 / 76

Required qualification: Individual who is able to assess the tasks assigned and

to identify possible safety risks owing to qualification in the subject, knowledge

and experience. The individual should also be familiar with the standards and

regulations.

1.2 Scope

This operating instructions is valid for all variants of the control, whose type co-

des start with:
XM21...
XM22...
The type code specifications are located on the type plate of the device. Also re-

fer to

chapter 2 "Product identification and scope of delivery" on page 3

1.3 Related documents

Title

Part number and document type

Rexroth IndraControl S20:
System and Installation

R911335988

Application Description

Rexroth IndraControl S20:
Diagnostic Tabs and Error Messages

R911344826

Application Description

IndraControl XFE 01.1
Extension Modules Profibus, RT-Ethernet, Sercos,

CAN

R911345570

Operating Instructions

Tab. 1-2: Related documents

The XM2x controls are provided as function package with the systems

IndraMotion MLC and IndraMotion MTX. The ordering data (type code, part

number) differ according to the selected function package (system functions).

The hardware characteristics described in this document apply to all available

function packages. For more information on the function packages, refer to the

respective system descriptions.
For related documents, go to the "Rexroth Media Directory" at

http://

www.boschrexroth.com

and enter the specified part number.

1.4 Customer feedback

Customer requests, comments or suggestions for improvement are of great im-

portance to us. Please email your feedback on the documentations to

Feed-

[email protected]

. Directly insert comments in the elec-

tronic PDF document and send the PDF file to Bosch Rexroth.

2/69
About this documentation

IndraControl XM21, XM22 Controls

Bosch Rexroth AG R911340667_Edition 04

Содержание Rexroth IndraControl XM21













































































Результаты поиска

Содержание Rexroth IndraControl XM21

Отзывы:

Похожие инструкции для Rexroth IndraControl XM21

Бренды по названию

Популярные бренды

Bosch Rexroth IndraControl XM21, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth IndraControl XM21

Отзывы:

Похожие инструкции для Rexroth IndraControl XM21

Бренды по названию

Популярные бренды