Bosch Rexroth IndraControl XM21, Руководство по эксплуатации

Страница: 21 / 76

No. Name Connection type Connector type
(Integrated) Mating connector and cable
(From outside)
①
XF1 Ethernet
(Sercos) RJ45 socket
8-pin RJ45 plug
(twisted pair, 8-wire)
②
XF2 Ethernet
(Sercos) RJ45 socket
8-pin RJ45 plug
(twisted pair, 8-wire)
③
XF31 USB device
USB 2.0 Micro USB socket
4-pin Micro USB plug
(4-wire)
④
S20 bus Bus base module
32-pin Bus base module for S20 I/O
modules
32-pin
⑤
SD Slot for SD card – SD card
⑥
XF30 USB host
USB 2.0 USB TYPE A-socket
4-pin USB TYPE A-plug
(4-wire)
⑦
XD1 24 V plug
U
LS
4-pin (4-wire)
⑧
XF5 Ethernet
(TCP/IP, RT Ethernet) RJ45 socket
8-pin RJ45 plug
(twisted pair, 4-/8-wire)
⑨
Extension bus Bus base module
32-pin Bus base module for exten-
sion modules
32-pin
Tab. 9-1: Control interfaces
9.2 Extension bus
Up to three extension modules can be freely connected at the left of the control.
The extension modules have to be attached without any gaps via the extension
bus base modules on the left side of the IndraControl XM21, XM22 and supplied
with the same 24 V supply voltage. Switch on and off the 24 V supply voltage of
the extension modules synchronously with the IndraControl XM21, XM22. For
the extension modules, refer to: R911345570
9.3 S20 interface
Up to 63 S20 modules can be connected to the S20 interface on the right of the
IndraControl XM21, XM22 via S20 bus base modules. The number of connecta-
ble modules depends on the total current consumption of the S20 modules. The
IndraControl XM21, XM22 can provide up to 2 A for the power supply of the S20
modules.
IndraControl XM21, XM22 Controls 15/69
Interfaces
R911340667_Edition 04 Bosch Rexroth AG