Bosch Rexroth IndraControl VAM 11.1, Руководство по планированию проекта

Страница: 58 / 86

Cable type Twisted pair, separately shielded
Inputs 12 x 24 V input (for switch or button of the hand-
held terminal)
Reference device HBA 098404, company Euchner
100 pulses/revolution; 300/min max.
Fig.7-17: Characteristics of the handwheel interface
7.7 X82: Connection for the Internal Handwheel
7.7.1 General Information
Connection X82 for the internal handwheel is located on the logic circuit board.
The counter value of the handwheel is transmitted to the master control via
PROFIBUS DP.
The module configuration and the address assignment are descri‐
bed in chapter 8 "Commissioning" on page 63 .
7.7.2 Pin Assignment (6-Pin Weidmüller Connector (3.5 Pin Spacing)
Con‐
nector
Pin Signal Meaning
X82 1 +5 V DC 5 V; ±5 % hand-wheel supply (+)
2 A Handwheel channel A
3 B Handwheel channel B
4 GND 0 V handwheel supply (-)
5 /A Handwheel channel A, inverted
6 /B Handwheel channel B, inverted
Fig.7-18: Pin assignment X81
7.8 Connection for the Hand-Held Terminal IndraControl
VEH 30.1 or VCH 08.1
7.8.1 Overview
The IndraControl VEH 30.1/30.2 or VCH 08.1 hand-held terminals are connec‐
ted via the integrated connection module in the VAM 11 and in the VAM 41.
Bosch Rexroth AG DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
56/83
Interfaces