Bosch Rexroth IndraControl VAM 11.1, Руководство по планированию проекта

Страница: 63 / 86

Risk of injury due to malfunction of the STOP
button or EMERGENCY STOP button.
DANGER
The circuit of the STOP button or EMERGENCY STOP button might be oper‐
ated with a maximum of 30 V and must be protected with a 2-A-fusible cut-out.
7.8.5 X2.2: Enabling Button VAC 30.2
Pin Assignment X2.2
Pin Signal name
X2.2 pin1 Enabling button 1 IN
X2.2 pin2 Enabling button 1 OUT
X2.2 pin3 Enabling button 2 IN
X2.2 pin4 Enabling button 2 OUT
Fig.7-26: Enabling button X2.2
Risk of injury due to malfunction of the enabling
button.
DANGER
The circuit of the enabling device might be operated with a maximum of 30 V
and has to be protected with a 2-A-fusible cut-out.
Wiring the Enabling Button
The following special requirements apply for the connection between the hand-
held terminal (IndraControl VEH 30.1/30.2 or VCH 08.1) and the safety-related
evaluation for the enabling button: It is required that short-circuits and/or cross-
circuits on the safety-related signal paths are safely detected by evaluation
devices.
The simultaneity monitoring is to be carried out by the monitoring device. Oth‐
erwise, an unidentified error accumulation can occur and can diminish safety.
The EN 60204-1:1997 also specifies that the enabling device is to be connected
to a stop of the category 0 or 1, i.e. the energy must be switched off.
For further information on the wiring of the enabling button and
connection examples how category 3 can be reached by using the
hand-held terminals VCH 08.1 or VEH 30.1/30.2 and its safety-re‐
lated parts, please refer to the documentation of the hand-held
terminals IndraControl VEH 30.1 (DOK-SUPPL*-VEH*30.1***-
PR02-EN-P), IndraControl VEH 30.2 (DOK-SUPPL*-VEH*30.2***-
PR01-EN-P) or IndraControl VCH 08.1 (DOK-SUPPL*-
VCH*08.1***-PR01-EN-P).
7.8.6 X3: Ethernet Interface VAC 30.2
The operator terminal can be connected to an Ethernet network via an Ethernet
interface.
RJ45, female connector, 8-pin
Type: Ethernet 10Base T / 100Base X
Cable length: Max. 65 m; patch cable (category 6)
DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels Bosch Rexroth AG 61/83
Interfaces