Bosch Rexroth IndraControl VAM 11.1 Скачать руководство пользователя страница 65

Страница: 65 / 86

Commissioning

8.1

GSD File

With the devices two GSD files according to EN 50170 Part 2 (DP) are provided.

These files contain all data allowing to connect the VAM 11.1 and VAM 41.1 to

any DP master (according to EN 50170 Part 2 (DP)). The master manufacturer

delivers or defines a suitable DP configuration tool with its DP master. A sample

configuration with IndraLogic is described in

chapter 8.8 "Sample Configuration

Using IndraLogic" on page 70

RX010123.GSD is a universal GSD file, which describes the VAM 11.1/

VAM 41.1 Machine Control Panelss as modular slave. You can select this GSD

file in the DP configuration tool via the station name "VAM". The modules must

be configured in the DP configuration tool in the right order. The order of the

modules is described in

chapter 8.7 "Configuration Specifications" on page

RX030123.GSD is a GSD file, which describes the VAM 11.1/VAM 41.1 Ma‐

chine Control Panelss as compact DP slave. This GSD file serves for easy

configuration of the VAM 11.1 and as basic device of the VAM 41.1. If you select

station name "VAM11, VAM41" in the DP configuration tool, the correct con‐

figuration of the modules is automatically displayed.
Please find the GSD files on the Bosch Rexroth web site or contact your sales

representative.

8.2

PROFIBUS DP Address Settings

The station address is set with two BCD rotary switches S1 and S2 (see

fig.

8-1 "BCD rotary switches S1 and S2" on page 63

) for the station addresses

1-99. S1 represents the tens digit and S2 the ones digit of the station address.
The address must be set if there is no voltage.

Fig.8-1:

BCD rotary switches S1 and S2

8.3

Baud Rate Setting

The VAM 11.1/VAM 41.1 machine control panels recognize automatically the

baud rate set at the PROFIBUS DP. Supported are baud rates ranging from 9.6

kbaud to 12 Mbaud:

DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels

Bosch Rexroth AG

63/83

Commissioning

Содержание Rexroth IndraControl VAM 11.1























































































Результаты поиска

Содержание Rexroth IndraControl VAM 11.1

Отзывы:

Похожие инструкции для Rexroth IndraControl VAM 11.1

Бренды по названию

Популярные бренды

Bosch Rexroth IndraControl VAM 11.1, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth IndraControl VAM 11.1

Отзывы:

Похожие инструкции для Rexroth IndraControl VAM 11.1

Бренды по названию

Популярные бренды