22/56
Press modules Type IH04
| Transport and storage
Bosch Rexroth AG, Edition 08.2021, RE 63124-B
6.1.2 Transport using forklifts and similar floor conveyors
WARNING
Falling or uncontrolled position change of the press module!
Danger to life! Risk of injury! Danger of crushing! Damage to property!
▶ Ensure a stable center of gravity position for the transport with floor conveyors.
▶ Observe the maximum load-bearing capacity of the floor conveyors used.
▶ If necessary, secure the press module against acceleration forces.
The transport of a press module with floor conveyors may only be carried out by
personnel who are qualified for the respective device including safety training.
To transport the press module using forklifts proceed as follows:
▶ With packed press modules, move the fork of the forklift under the pallet.
▶ Carefully lift the load to check the center of gravity position. Ensure a stable
center of gravity position.
▶ Make sure that the press module cannot move out of the intended position.
▶ Only lift the press module as far off the floor as necessary for the transport.
▶ Carefully set down the press module.
6.1.3 Transport using cranes and similar lifting gear
WARNING
Falling or uncontrolled position change of the press module!
Danger to life! Risk of injury! Danger of crushing! Damage to property!
▶ Ensure a stable center of gravity position for the transport with lifting gear.
▶ During transport, make sure that components do not come into contact with
attachment devices or lifting gear.
▶ Do not lift the press module by the attached components, e.g. by the attached
extension module.
▶ Observe the maximum load-bearing capacity of the lifting gear used.
▶ Attach suitable securing and/or safety gear if necessary.
