Bosch rexroth Automax 100, Руководство по эксплуатации

Страница: 69 / 102

Operation | Automax 100 | Extension module TS-AC E2-M3-1X 63/94
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
Diagnostics of the local bus
6. To verify the manually set IP address, navigate to „Configuration > IP Settings“ (

). If
necessary, the IP address can be adjusted here. NOTICE! In difference to the manual
setting of the IP address by the rotary coding switches „S1“ and „S2“, the WBM
interface offers the possibility to configure all 4 octets over the complete value range.
ATTENTION! If you have modified the IP address, it is necessary to enter a password
(

) to accept the new configuration. See the following figure
Web based management interface „IP-Settings“
ATTENTION! The password for the bus coupler at factory setting is: private. If you have
modified the password of the bus coupler, you must enter the corresponding password (

)
to accept the IP settings. By clicking the „Apply and Restart“ button, the new configured IP
address is saved at the bus coupler.
9.1.2 Overview of the WBM interface of the bus coupler ETH-BK
This chapter gives an overview of the WBM interface of the bus coupler. Here you will find a
short overview of the structure of the start page, the navigation and the resulting