Bosch rexroth Automax 100, Руководство по эксплуатации

Страница: 51 / 102

Transport and storage | Automax 100 | Extension module TS-AC E2-M3-1X 45/94
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
Transport and storage
6.1 Transporting the product
DANGER
Compromising of the training system, individual components or other assets. Risk
for safe operation of the training system!
Risk of injury or death for operator or third
 Chapter „ Safety instructions “ as of page [  5 ] in these operating instructions must
always be observed!
WARNING
Risk of injury, potential property damage during transport due to improper handling!
Risk of injury, property damage
 Do not walk or stand under suspended loads
 Always lift or carry the extension module separately
 Wear safety shoes
For transport of the extension module, observe its protection class IP20 according to DIN
EN 60529.
Protection class IP20 means:
2 – protected against ingress of foreign particles >12.5 mm diameter
0 – not protected against ingress of water (humidity)
Prevent increased vibrations and shocks during transport and transport the product inside a
packaging that protects it against dust and humidity.
6.2 Storing the product
NOTICE
Risk of damage caused by humidity and dampness!
Damage to property

Protect the extension module from humidity by covering it
 Storage only in rain-protected, dry rooms
 Protect the extension module against strong temperature variations to prevent the
formation of condensation water and corrosion
The extension module must be stored in its original packaging in a dry, dust-protected and
vibration-free environment and protected from light and direct sunlight.
Storage specification
Designation Unit Value
Storage temperature range ℃ -25 to +70
Relative air humidity % max. 90
No condensation --- ---
No ice formation/icing --- ---