39
Figure
a)
Ins
ert the telescopic tube into the connecting piece
of
the floor tool. To release the connection, turn the
tube slightly and pull it out of the floor tool.
b)
Push
the telescopic tube into the connecting piece of
the floor tool until it locks in place. To release the
conn
ection, press on the locking collar and pull out
the telescopic tube.
Figure
●
Unlock
the telescopic tube by moving the sliding
sw
itch in the direction of the arrow and adjust to the
d
esired length. The slide resistance on carpet is at
its lowest when the telescopic tube has been com
-
pl
etely pulled out.
Figure
a)
Pl
ace the accessories holder in the required position
on
the telescopic tube.
b)
Us
e some pressure to insert the upholstery nozzle
w
ith brush ring and the crevice nozzle into the acces
-
sor
ies holder from above or below.
Figure
●
Hold
ing the power cord by the plug, pull out to the
r
equired length and insert the plug into the mains
sock
et.
Figure
●
To
switch the vacuum cleaner on or off, press the
ON/OFF
button.
Figure
Controlling the suction level
Th
e required suction level can be set to any level by
turning the control knob.
Low
power range
=>
For
vacuuming delicate materials, such as delicate
uphols
tery, curtains, etc.
M
edium power range
=>
For
daily vacuuming of floors which are only slightly
d
irty.
H
igh power range
=>
For
vacuuming durable floor coverings, hard floors
and heavy deposits of dirt.
Vacuuming
!
Caution
Floor
tools are subject to a certain amount of wear,
d
epending on the type of hard floors you have (e.g.
rough,
rustic tiles). Therefore, you must check the
und
erside of the floor tool at regular intervals. Worn
und
ersides of floor tools may have sharp edges that
c
an damage sensitive hard floors, such as parquet or
l
inoleum. The manufacturer does not accept any res
-
pons
ibility for damage caused by worn floor tools.
7
8
6
5
4
3*
Figure
S
et the adjustable floor tool:
Rugs
and carpets
=>
H
ard floors/parquet
=>
If
you are vacuuming up larger particles, make sure that
you
vacuum them up successively and carefully to ensu
-
r
e that the vacuum channels of the floor tool do not
b
ecome blocked.
If
necessary, you should raise the nozzle in order to
b
etter vacuum up the dirt particles.
Figure
Vacuuming with accessories
A
ttach the nozzles to the suction pipe or hand grip as
r
equired:
a)
Cr
evice nozzle for vacuuming crevices and corners,
etc.
b)
Uphols
tery nozzle for vacuuming upholstered furnitu
-
r
e, curtains, etc.
c)
Uphols
tery nozzle with fixed brush ring for vacuu
-
m
ing window frames, cupboards, profiles, etc.
Af
ter use, reinsert the crevice nozzle and upholstery
nozzl
e into the accessories holder.
d)
Prof
essional crevice nozzle
Ex
tra-long crevice nozzle for cleaning crevices, cor
-
n
ers and narrow spaces, e.g. in a car.
e)
Prof
essional upholstery nozzle
For
gently and thoroughly cleaning upholstered furni
-
ture, curtains, etc.
To
clean the professional upholstery nozzle, simply
v
acuum it using the handle.
f)
H
ard-floor tool for vacuuming hard floor coverings
(
tiles, parquet flooring, etc.)
Figure
Cleaning the hard-floor tool
a)
V
acuum from below to clean the tool.
b)
Us
e scissors to cut through threads and hairs wound
round
the rollers, then vacuum them up.
Figure
You
can use the parking aid on the side of the vacuum
cl
eaner if you wish to stop vacuuming for a short time.
●
Af
ter switching off the appliance, slide the hook on
the floor tool into the parking aid.
Figure
Wh
en vacuuming stairs, the appliance must be positio
-
n
ed at the bottom of the stairs. If it does not reach far
enough, the appliance can also be carried using the
c
arrying handle.
When your work is finished
Figure
●
Sw
itch off the appliance.
●
Pull
out the mains plug.
●
Br
iefly pull the power cord and release. (The power
cord
retracts automatically).
9
10*
11*
12
13
14
*
d
ependent on model
Bedienung_BGS5_8001011681_GS5014.07.201512:15Seite39
