118
en | Keyboard Commands
MIC IP starlight 7000 HD
2016.07 | 5.0 | F.01U.291.520
Operation Manual
Bosch Security Systems
Function
Key
Command
No.
Command
Description
On/Off
95
Display Azimuth/Elevation
Readings
On–Displays azimuth/elevation readings.
Off–Hides azimuth/elevation readings.
Refer to Azimuth, Elevation, and Compass
Directions.
On/Off
96
Display Compass (Point)
Readings
On–Displays compass heading.
Off–Hides compass heading.
Refer to Azimuth, Elevation, and Compass
Directions.
On
99
Factory P/T Home Position
Recalibrates home position; can be used as an
Alarm Output.
On/Off
100
Record Tour A
Starts/stops recording Tour A.
On/Off
101
Record Tour B
Starts/stops recording Tour B.
On/Off
102
Wiper On/Off
On: Continuous wiper mode, stops
automatically after five minutes.
On/Off
103
Wiper On/Off
On: Intermittent; wipes twice, then turns off
after 15 seconds. This cycle repeats until turned
OFF.
On/Off
104
Wiper On/Off
On: One-shot; wipes five times, then turns off.
On/Off
105
Wash/Wipe On/Off
On: Camera moves to designated washer preset
62, wiper & washer automatically start.
On/--
149
Reset Position Correction
Counters
On: Reset position correction counters.
On
606
Power Mode
Temporarily displays current power mode “24
VAC:”, “POE+”, “POE++”, or “Unknown”).
On/Off
700
Proportional Speed Control
adjustment
On – Increase Proportional Speed
Off – Decrease Proportional Speed
Overlay feedback provided. Speeds cycle
through Super Slow, Slow, Medium, and Fast.
On/Off
804
Mask Calibration Procedure
Manual procedure to calibrate masks (privacy
and virtual).
On/Off
908
Privacy Mask Enlargement
Turns privacy mask enlargement on/off during
PTZ movement.
On
911
Camera Reboot
Forces the camera to complete the power on
boot sequence. AUTODOME cameras will
complete “Finding Home”.
Set
62
Washer
Activate washer.
Set
“1-99”
Pre-position Programming
Set ##–Programs a preset view.
Shot
“1-99”
Pre-position Recall
Shot ##–Recall programmed preset.
