MIC IP starlight 7000 HD
Configuration | en
41
Bosch Security Systems
Operation Manual
2016.07 | 5.0 | F.01U.291.520
Notice!
Click the
Help on this page?
link if you need more information.
13.2.3
About the Configuration Page
The
Configuration
page is used to configure the unit and the application interface.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Not every page has a
Set
button. Changes to pages without a
Set
button are set immediately.
If a page does show a
Set
button, you must click the
Set
button for a change to take effect.
Notice!
Save each change with the associated
Set
button.
Clicking the
Set
button saves the settings only in the current field. Changes in any other fields
are ignored.
Some changes only take effect after the unit is rebooted. In this case, the
Set
button changes
to
Set and Reboot
.
1.
Make the desired changes.
2.
Click the
Set and Reboot
button. The camera reboots and the changed settings are
activated.
All settings are backed up in camera memory so they are not lost even if the power fails. The
exception is the time settings, which are lost after 1 hour without power if no central time
server is selected.
13.3
Configuring Audio (Optional)
Note for MIC7000 cameras only:
These options are available only if you have connected a
VIDEOJET connect device (VJC-7000-90) to your camera.
