MIC IP starlight 7000 HD
Operation | en
105
Bosch Security Systems
Operation Manual
2016.07 | 5.0 | F.01U.291.520
23.5
Configuring Settings for IR Illumination
The following table provides the valid combinations of settings for activating IR illumination.
To activate IR illumination, set the menus Night Mode, IR Illuminator, and IR Focus Correction
to the values identified in the table below, depending on your desired results.
RESULTS
Notes
Menu
Night
Mode
IR
Illuminator
IR Focus
Correction
Model: MIC camera
with
IR
Setting
Auto
Auto
Auto (or
ON if Auto
not
available)
Within 10 seconds of
switching to Night
Mode, the IR lamps
turn on.
This is the
recommended
configuration.
Auto
Off
Auto (or
ON if Auto
not
available)
IR lamps turn on with
Aux 54 or alarms.
Use this for manual
control of the IR lamps.
Off
Auto
Auto (or
ON if Auto
not
available)
Camera enters Night
Mode with Aux 57 or
alarms.
Use this for manual
control of Night Mode.
Model: MIC camera
without
IR
Setting Auto
--
On
When using external IR
lamps, user must
control the IR Focus
Correction using Aux
67 or alarms.
For control of IR Focus
Correction with a MIC
camera (non-IR).
There are no other valid combinations. Any other combination can cause the camera to have
problems focusing ("focus issues").An example of an invalid combination is:
–
Night Mode = Auto
–
IR Illuminator = Auto
–
IR Focus Correction = Off
This combination of settings causes a blurred view at
wide
angle. (When zoomed in (at TELE
angle), the view is focused.)
23.6
Uploading a User Logo
Customers have the option to upload custom logos that display on the web browser of the
device.
All user logo images must comply with the following requirements:
–
The file format must be a bitmap (.bmp).
–
Height and width must not exceed 128 pixels.
–
Color depth must be 8 bit (256 color bitmap).
Upload the Logo File
1.
If necessary, open the browser. Click
Configuration
.
2.
Click
General
. Select
Display Stamping
.
