42
en | Operation
LE10 Radio Receiver
F.01U.139.675 | V1.3 | 2013.05
User Manual
Bosch Security Systems
6
Operation
6.1
Standby mode
The LE10 Radio Receiver enters standby mode when the power
supply is connected. Both relays are off. See
Section 4.2.1 Mode
indication after power on, page 38
.
6.1.1
Standby with no transmitter programmed
Device behavior
–
LED 1 stays permanently green.
–
LED 2 blinks 3 times red every 10 seconds.
6.1.2
Standby with at least one transmitter programmed
Device behavior
–
LED 1 stays permanently green.
–
LED 2 stays permanently off.
6.2
Normal mode (modes 1 and 2)
6.2.1
Activation of a transmitter in normal mode
Device behavior
–
LED 1 stays permanently green.
When a matched transmitter is activated:
–
LED 2 lights up permanently red for 10 seconds.
–
Relay 1 switches on for 10 seconds.
–
Relay 2 stays off.
If the same or another matched transmitter is activated within
10 seconds, the alarm will be retriggered for 10 seconds.
Device behavior when a transmitter has a low battery
–
LED 1 stays permanently green.
When the transmitter is activated:
–
LED 2 blinks red twice for 2 seconds, then lights up
permanently for 8 seconds. It then blinks once every 10
seconds.
–
Relay 1 switches on for 10 seconds.
