LE10 Radio Receiver
Operation | en
43
Bosch Security Systems
User Manual
F.01U.139.675 | V1.3 | 2013.05
–
Relay 2 switches on permanently until the battery is
replaced and the transmitter is activated again.
Device behavior when the battery is replaced in a transmitter
–
LED 1 stays permanently green.
When the transmitter is activated:
–
LED 2 stops blinking every 10 seconds, and lights up
permanently red for 10 seconds.
–
Relay 1 switches on for 10 seconds.
–
Relay 2 switches off.
6.3
Dementia (mode 3)
6.3.1
Activation of a S37L Wristband Transmitter
Device behavior
–
LED 1 stays permanently green.
When a S37L transmitter is activated:
–
LED 2 lights up permanently red for 7 seconds.
–
Relay 1 switches on for 7 seconds.
–
1 second after Relay 1, Relay 2 switches on for 3 seconds.
The procedure is repeated if a S37L transmitter is activated
again.
Device behavior when a S37L transmitter has a low battery
–
LED 1 stays permanently green.
When the S37L transmitter is activated:
–
LED 2 blinks red twice for 2 seconds and then lights up
permanently red for 5 seconds.
–
Relay 1 and Relay 2 behave as above.
6.3.2
Detection of a S37E Wristband Transmitter alone
Device behavior
–
LED 1 stays permanently green.
NOTICE!
In normal mode 2, LED 2 is deactivated regarding battery-low
indication and will not blink every 10 seconds.
