36
en | Installation
LE10 Radio Receiver
F.01U.139.675 | V1.3 | 2013.05
User Manual
Bosch Security Systems
3.3
Connecting the power supply
There are two different ways to connect the power supply of
the LE10 Radio Receiver. After connection, the LE10 Radio
Receiver will be in standby mode.
3.3.1
Power supply with the RJ12 power socket
The LE10 Radio Receiver can be powered by a power supply
unit (PSU). The PSU should be plugged in the RJ12 socket on
the rear side of the unit and should be easily accessible at any
time. See
Section 4.1 Connecting ports, page 37
for access to
the socket. See
Section 8 Technical data, page 50
for
information about the power supply.
3.3.2
Power supply connected to a wired installation
The LE10 Radio Receiver can be powered by connecting a wired
input into poles 1 and 2 of the connection board. See
Section 4.1 Connecting ports, page 37
for information about the
power supply.
