40
en | Programming
LE10 Radio Receiver
F.01U.139.675 | V1.3 | 2013.05
User Manual
Bosch Security Systems
5.3
Delete a transmitter
To start deleting:
–
Press button T1 for min. 5 seconds and max. 10 seconds.
Device behavior
–
LED 1 stays permanently green, then after 5 seconds
blinks fast 5 times.
–
LED 2 stays off and then blinks for 30 seconds.
Within these 30 seconds, activate the transmitter that you want
to delete, the following behavior should be observed:
–
LED 1 stays permanently green.
–
LED 2 stays permanently red for 5 seconds and then turns
off.
This indication confirms that the transmitter is deleted. You can
repeat the sequence with another transmitter.
5.4
Delete all transmitters
To start deleting
–
Press button T1 for minimum 20 seconds and maximum 40
seconds.
Device behavior
–
LED 1 stays permanently green, then after 5 seconds,
blinks fast 5 times. After 20 seconds, LED 1 will blink for
20 seconds.
–
At that moment, LED 2 lights up permanently red for 5
seconds then turns off.
This indication confirms that all transmitters are then deleted.
NOTICE!
Per sequence only one transmitter can be deleted.
NOTICE!
If button T1 is pressed longer than 40 seconds, then the LE10
Radio Receiver will jump out of the programming mode.
