LE10 Radio Receiver
Programming | en
41
Bosch Security Systems
User Manual
F.01U.139.675 | V1.3 | 2013.05
5.5
Program a door address in modes 3 or 4
You can program a door address stored in a S37L Wristband
Transmitter with Locating function, in modes 3 or 4.
To start programming
–
Press button T1 min. 1 second and max. 3 seconds.
Device behavior
–
LED 1 stays permanently green.
–
LED 2 blinks red slow for max. 30 seconds.
–
Activate the S37L Wristband Transmitter, which you desire
to match, before the end of the 30 seconds.
–
Upon activating the transmitter, LED 1 and LED 2 blink
alternating green-red quick for 6 seconds.
This indication confirms that the door address in S37L
Wristband Transmitter is matched in the LE10 Radio Receiver.
5.5.1
Programming in modes 6 or 7
It is neither possible nor necessary to program a transmitter in
modes 6 or 7 (Open Receiver).
NOTICE!
A door address must be stored beforehand in a S37L Wristband
Transmitter with Locating function.
NOTICE!
Only one door address of a S37L Wristband Transmitter with
Locating function can be matched in the LE10 Radio Receiver.
CAUTION!
When a new door address stored in a S37L Wristband
Transmitter is programmed, it overwrites the current door
address.
