FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Configuration | en
43
Bosch Security Systems B.V.
User manual
11-2022 | V02 | F.01U.394.427
Test e-mail
Click
Send Now
to test the e‑mail function. An alarm e-mail is immediately created and sent.
Click
Set
to apply the changes.
4.6.5
Alarm Inputs
Note:
Only applicable to FLEXIDOME indoor 5100i IR and FLEXIDOME outdoor 5100i IR:
NDV-5702-AL, NDV-5703-AL, NDV-5704-AL, NDE-5702-AL, NDE-5703-AL, NDE-5704-AL.
Active
Configure the alarm triggers for the unit.
Select
N.C.
(Normally Closed) if the alarm is to be triggered by opening the contact.
Select
N.O.
(Normally Open) if the alarm is to be triggered by closing the contact.
Name
Enter a name for the alarm input. This is then displayed below the icon for the alarm input on
the
Live
page (if configured).
Action
Select a type of action to be performed when an alarm input occurs:
–
None
–
Monochrome
This switches the camera to the monochrome mode.
–
Switch mode
When this is selected, you can select the
Scene Mode
to be used for the active and
inactive period of the alarm.
Click
Set
to apply the changes.
4.6.6
Alarm Outputs
Note:
Only applicable to FLEXIDOME indoor 5100i IR and FLEXIDOME outdoor 5100i IR:
NDV-5702-AL, NDV-5703-AL, NDV-5704-AL, NDE-5702-AL, NDE-5703-AL, NDE-5704-AL.
Configure the switching behavior of the output.
Select different events that automatically activate an output. For example, turn on a floodlight
by triggering a motion alarm and then turn the light off again when the alarm has stopped.
Idle state
Select
Open
for the output to operate as a normally open contact, or select
Closed
if the
output is to operate as a normally closed contact.
Operating mode
Select the way the output works.
For example, if you want an activated alarm to stay on after the alarm ends, select
Bistable
. If
you wish an activated alarm to stay on for ten seconds for example, select
10 s
.
Output follows
Select the event that triggers the output.
Output name
The alarm output can be assigned a name here. This name appears on the Live page.
Toggle
Click the button to switch the alarm output manually (for example, for testing purposes or to
operate a door opener).
Click
Set
to apply the changes.
