FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Configuration | en
31
Bosch Security Systems B.V.
User manual
11-2022 | V02 | F.01U.394.427
If you activate the recording function, the active profile switches from
Non-recording profile
to
Active profile
.
The
Active profile
follows the scheduled profiles under
Recording Profiles
. Please refer to
section
Recording Profiles
.
This behavior is only applicable when using Bosch recording solutions, including edge
recording or VRM recording. Third-party recording solutions might use the
Non-recording
profile
.
If no edge recording or VRM recording is active, the active profile is managed via the drop-
down of
Non-recording profile
.
If edge recording or VRM recording is active, the active profile is managed via the menu in
Recording Profiles
. Please refer to section
Recording Profiles
.
Click
Frame and bit rate test
to see when and if a specific stream will drop frames.
Encoder Profile
To access the
Encoder Profile
configuration window for the individual streams, click the edit
(pencil) button next to the respective
Active profile
or
Non-recording profile
sections.
!
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
Profile name
If required, enter a new name for the profile.
Video resolution
Select one of the available video resolution options from the drop-down menu.
Frame rate
The
Frame rate
slider determines the interval at which images are encoded and transmitted.
This can be particularly advantageous with low bandwidths. The frame rate is displayed next
to the slider.
The frame rate is the result from the maximum or base frame rate divided by the value of the
encoding interval (for example, with a base frame rate of 30 fps and an encoding interval of 6,
the encoded frame rate is 5 fps).
Intelligent streaming
Bosch
Intelligent Streaming
focuses on:
–
Avoid the encoding of noise
–
Optimize encoding related to human vision
–
Avoid spending too much bitrate on irrelevant regions
Maximum bit rate
The encoder does not exceed the maximum bit rate set, which limits the image quality when
necessary. Use the
Averaging period
to stabilize the maximum bit rate.
The
Target bit rate
is managed only when the
Averaging period
is set. If the value entered is
too low, it will be adjusted automatically.
This value is not the network transmission bit rate.
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
