42
en | Maintenance
DIVAR IP 6000 (3U)
2016.08 | V2.1 | DOC
Installation Manual
Bosch Sicherheitssysteme GmbH
To install the air shroud:
1.
Make sure that your air shroud matches your chassis model.
2.
Turn off the system and remove the cover.
3.
Place the air shroud in the chassis. The air shroud fits behind the two fans closest to the
power supply.
4.
After checking the fit of the air shroud, remove any break-away tabs necessary to ensure a
proper fit with the serverboard.
To check the air flow:
1.
Make sure there are no objects to obstruct airflow in and out of the chassis. In addition, if
you are using a front bezel, make sure the bezel's filter is replaced periodically.
2.
Do not operate the system without drives or drive trays in the drive bays. Use only
recommended material.
3.
Make sure no wires or foreign objects obstruct air flow through the chassis. Pull all
excess cabling out of the airflow path or use shorter cables. The control panel LEDs
inform you about system status.
10.12
Replacing a system fan
!
Caution!
Hazardous moving parts
Keep away from moving fan blades.
The fans might still be turning when you remove the fan assembly from the chassis. Keep
fingers, screwdrivers, and other objects away from the openings in the fan assembly's
housing.
