36
en | Maintenance
DIVAR IP 6000 (3U)
2016.08 | V2.1 | DOC
Installation Manual
Bosch Sicherheitssysteme GmbH
The unit features hot-swappable hard drives which can be removed without powering down
the system.
2
1
1
Release button
2
Hard drive carrier handle
To remove a hard drive from the chassis:
1.
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
2.
Use the handle to pull the drive out of the chassis.
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
10.4.2
Installing a hard drive into a hard drive carrier
The hard drives are mounted in hard drive carriers.
To install a hard drive into a hard drive carrier:
1.
Remove the screws securing the dummy drive to the hard drive carrier.
