DIVAR IP 6000 (3U)
Maintenance | en
37
Bosch Sicherheitssysteme GmbH
Installation Manual
2016.08 | V2.1 | DOC
2.
Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a
flat surface.
3.
Slide a new hard drive into the hard drive carrier with the printed circuit board side
facing down.
4.
Align the mounting holes in both, the hard drive carrier and the hard drive.
5.
Secure the hard drive to the hard drive carrier using six screws.
1
Hard drive carrier
2
SATA hard drive
6.
Replace the hard drive carrier into the chassis bay. Make sure that the hard drive carrier
handle is completely closed.
Notice!
We recommend using the respective Bosch hard disk drives. The hard disk drives as one of
the critical component are carefully selected by Bosch based on available failure rates. HDD –
not delivered from Bosch – are not supported. Information on supported HDDs can be found
in the datasheet in the Bosch Online Product Catalog.
