1 689 989 087
2018-07-24
|
Robert Bosch GmbH
Initial startup | CRI/CRIN 848H | 67
en
3.
Slide protective ring 1 685 510 176 (Fig. 25, item 5)
all way up to protective cover (Fig. 25, item 6).
4.
Slide high-pressure pump (Fig. 25, item 1) onto
clamping bracket and attach to drive coupling
(Fig. 25, item 3).
5.
Fasten high-pressure pump using two clamping
screws (Fig. 25, item 2) to clamping bracket.
458845-
13_Pal
3
1
4
5
6
2
Fig. 25: High-pressure pump clamping
6.
Slide protective ring (Fig. 26, item 1) over drive cou-
pling and clamp tight.
458846-1
4_Pal
1
Fig. 26: Assembling protective ring
4.2
Hydraulic connection of high-pres-
sure pump
i
Use is to be made of the high-pressure hose from
the tester set CRS 845 / CRS 845H for connecting
the high-pressure pump to the high-pressure rail.
!
Note tightening torque.
1.
Connect inlet hose line (Fig. 27, Fig. 28, item 1) and
return hose line (Fig. 28, Fig. 28, item 2).
2.
Connect high-pressure hose (Fig. 26, Fig. 27, item 3)
to high-pressure pump and high-pressure rail.
Tightening torque: 25-30 Nm
458847-2
9_Pal
25-30 Nm
2
3
1
Pump Ove
r
Flow-Oil
Fig. 27: Hydraulic connection on EPS 708
Содержание CRI 848H
Страница 2: ......
