Bosch CCS 800 Ultro, Инструкция по установке и эксплуатации

Страница: 19 / 36

Bosch Security Systems B.V. | 2007-08
CCS 800 Ultro | Installation and Operating Manual en | 19
7.3.1 Overview of set-up icons
table 7.2: Overview of icons for navigating set-up screens
Icon Icon name Function of icon
Next (displayed at lower
left of set-up screen)
Go to next set-up screen. This icon is also displayed at the top left of
the set-up screen to indicate that the other modes can be selected at
any time, by pressing the change mode button (1).
Select Selects next value to change.
Down Decreases value, or selects another value or file.
Up Increases value, or selects another value or file.
Date Indicates that the date set-up screen is selected.
Time Indicates that the time set-up screen is selected.
Bit rate Indicates that the bit rate set-up screen is selected.
Microphone recording Unit will only record if one or more microphones are active.
Constant recording Unit will constantly record (one or more microphones do not have to
be active).
Confirm delete Confirms file to be deleted.
Delete file Permanently deletes selected file.
Cancel delete Cancels the delete file command.
Record to card Sets up recording so that files are saved to the SD card. Data will still
be saved to the internal memory during card exchange, as described
in section 7.4.3.
Record to memory Sets up recording so that files are saved to the internal memory.
Hourglass Initializing SD Card.
SD card status Card flashing at 2 Hz: card is initializing.
Card flashing at 5 Hz: card is either: full, write protected, or
incompatible.