manualshive.com logo in svg

Bosch B450, Инструкция по установке и эксплуатации

Поделиться
Скачать
Bosch B450 Скачать руководство пользователя страница 37

Conettix Plug-in Communicator Interfaces

Configuration | en

37

Bosch Security Systems, Inc.

Installation and Operation Guide

2017.10 | 09 | F.01U.300.740

When the Transmit (TX) and Receive (RX) LEDs flash in unison at a 1-second interval, the
module successfully received the SMS. If the module received an invalid SMS, the Transmit
(TX) and Receive (RX) LEDs alternately flash at 1/2 second interval. Both flashing patterns
continue until you move the bus address switch from position "0.”

Notice!

If the LEDs indicate an invalid SMS, change the bus address switch from 0 and then back to 0
before you send a different SMS.
Refer to the tables in 

Maintenance and troubleshooting, page 38

 section for more information

on LEDs. Make sure that the SMS contains the correct information, and that you entered the
correct phone number for the module.

5.4.3

Exiting from CONFIG mode

1.

Change the bus address switch to the desired value, depending on the supported control
panel.

2.

Check the signal strength and Heartbeat LED for status.

5.4.4

Configuration

Содержание B450


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды