Bosch B450, Инструкция по установке и эксплуатации

Страница: 33 / 49

Conettix Plug-in Communicator Interfaces Configuration | en 33
Bosch Security Systems, Inc. Installation and Operation Guide 2017.10 | 09 | F.01U.300.740
Transceiver Model
number Shows one of the following: DE910-DUAL, CE910-DUAL, GE910-QUAD
Carrier Name Shows the carrier network providing service.
Data Status Shows one of the following: Disconnected, Connecting, or Connected.
Signal Strength Shows the current signal strength in dbm.
Towers Available Shows the number of towers that can be detected by the module
Base Station ID Shows information about the tower you are currently connected to.
Current Band Shows the current band frequency
Data Class Shows one of the following: 1xRTT, 3G, GPRS, EDGE, WCDMA, HSPA
Temperature Shows the internal temperature of the radio transceiver (in Celsius)
Advanced Bus Status
Bus Voltage Shows the voltage measured at the input to the module
Bus Commands
received This is a running total of the number of valid bus messages that the
module has received. If the module is on the bus and operating, this
number changes when refreshed.
Status sub-menu
To open a sub-menu, from the [1] Status (Starts With Basic Status) menu, press the number
key for the menu. For example, press [1] to open 1. Basic Status Menu.
Option Description
1. Basic Status
Menu Shows the current IP address, link status, modem status, bus status, and
module status.
2. Advanced
Status Menu Shows various parameters related to the cellular device such as UDP
packets transmitted and received, the carrier name, available towers, and
data class.
3. Reset Status Shows several items that are counts of activities, such as UDP packets
transmitted. When you select Reset Status, all counts return to zero.
4. Signal
Strength The current signal strength records every 15 minutes for up to 48 hours
worth of data. When you select Signal Strength, Tera Term shows up to 192
values that represent the signal strength over the last 48 hours. If the B450
has been powered up less than 48 hours, the list shows only the samples
taken so far. If it has been less than 15 minutes, the menu shows “Not
Available” listed.