AVIOTEC IP starlight 8000
Use cases | en
41
Bosch Sicherheitssysteme GmbH
Operation and Commissioning Manual
2020.08 | 01 | F.01U.391.015
Delay [s]
Select the delay period for the reaction of the video content analysis to trigger signals. The
alarm is only triggered after a set time interval in seconds has elapsed and then only if the
triggering condition still exists. If the original condition has been restored before this time
interval elapses, the alarm is not triggered. A delay period may be useful in avoiding false
alarms or frequent triggering. During the delay period, the
Silent VCA
configuration is always
enabled.
4
Go to
Interfaces
, select
Alarm Inputs
and adapt the corresponding alarm input to your
needs.
Notice!
If you have not yet created any fire detection profiles (see
Fire detection and VCA profiles,
page 39), you must do so and go to
Configuration
>
Alarm
>
Fire detection
.
One example would be an environment with cleaning cycles. A key switch can be used as an
external trigger to switch between the different fire detection profiles.
Refer to
–
Содержание AVIOTEC IPSTARLIGHT 8000
Страница 1: ...AVIOTEC IP starlight 8000 FCS 8000 VFD B Firmware 7 7x en Operation and Commissioning Manual ...
Страница 2: ......
Страница 69: ......