AVIOTEC IP starlight 8000
Adjustment of detection settings | en
37
Bosch Sicherheitssysteme GmbH
Operation and Commissioning Manual
2020.08 | 01 | F.01U.391.015
Delete Automasks
Notice!
Delete automasks if you changed the camera position, zoom, point of view or after a fire. Also
delete automasks if the spatial arrangement of objects in the detection area has changed
fundamentally.
To delete the automasks for Flame detection from the alarm memory:
1.
Navigate to
Fire detection
>
Flames
>
Detection
.
2.
Select
Off
and press
Set
.
3.
Select
On
and press
Set
.
P
Automasks for Flame were deleted.
To delete the automasks for Smoke detection from the alarm memory:
1.
Navigate to
Fire detection
>
Smoke
>
Detection
.
2.
Select
Off
and press
Set
.
3.
Select
On
and press
Set
.
P
Automasks for Smoke were deleted.
7.3
Adaptation to the lighting situation
The lighting can vary greatly from application to application. You can adjust the following
settings to the lighting situation.
7.3.1
General lightning settings
There are three different settings in the camera menu that are important for lighting in relation
to video-based fire detection:
Go to
Camera
>
Installer Menu
>
Day/Night
. You can select the following settings:
Auto
- the camera switches the IR cut-off filter on and off depending on the scene illumination
level. Select this setting if you have continuous natural or artificial light in your application and
at last 2 lx are available or you have artificial light and redundant IR lightning.
Monochrome
- the IR cut-off filter is removed, giving full IR sensitivity. Select this setting if you
have continuous IR lightning in your application.
Color
- the camera always produces a color signal regardless of light levels. Select this setting
if you have continuous natural or artificial light in your application.
7.3.2
Flickering
Select the mode for automatic light-level control:
–
Fluorescent 50 Hz
–
Fluorescent 60 Hz
–
Outdoor
7.4
Relay settings
Notice!
The alarm output is only configurable for flame or smoke alarms. Forwarding alarms coming
from Intelligent Video Analytics is not possible.
Содержание AVIOTEC IPSTARLIGHT 8000
Страница 1: ...AVIOTEC IP starlight 8000 FCS 8000 VFD B Firmware 7 7x en Operation and Commissioning Manual ...
Страница 2: ......
Страница 69: ......
