Bosch AVIOTEC IPSTARLIGHT 8000, Руководство по эксплуатации и пуско-наладке

Страница: 18 / 70

18 en | Installation AVIOTEC IP starlight 8000
2020.08 | 01 | F.01U.391.015 Operation and Commissioning Manual Bosch Sicherheitssysteme GmbH
4 Installation
Notice!
Do not expose the image sensors to direct sunlight.
Do not obstruct the free flow of air around the camera.
Notice!
Avoid backlight.
Backlight can disturb the video-based fire detection algorithm.
Notice!
Minimum Illumination required.
To ensure the proper functioning of the video-based fire detection algorithm, a minimal
illumination of 2 lx is required. If the illumination is less than 2 lx, an additional IR illumination
is required.
Notice!
Avoid obstructions in the field of view!
Covered fires cannot be detected correctly. An unobstructed view of the detection area is
necessary.
Notice!
Avoid image regions with continuous upward motion.
Continuous upward motion might lead to false alarms.
Notice!
Make sure the camera is firmly mounted.
Camera shake might lead to false alarms. Avoid vibrations of the camera and the camera
environment.
4.1 Requirements
When installing the camera, take the following points into account or have prepared the
following:
–
Computer and its IP address
– Download of newest Firmware / Software tools
– IP range of the network
– Plan sketches with camera position and designation
– Planning of the camera setting (size flame/ smoke, verification time + sensitivity if
available)
– Recording
– Required work equipment for configuration:
– POE power camera connection
– Computer with admin rights and Internet access
– Download the latest firmware and tools (e.g. Configuration Manager)
– IP address range change on Computer
– A multimeter for testing the relay output
– Analog monitor and cable for camera alignment