Bosch Autodome IP 4000 HD, Руководство по установке

Страница: 37 / 57

AUTODOME IP 4000 HD Installing a Pipe Mount and Camera | en 37
Bosch Security Systems Installation Manual 2015.11 | 1.1 |
751.9
(29.6)
444.9
(17.5)
88.8
(3.5)
88.8
(3.5)
Ø11.2 (4x)
(0.44)
3/4-14 NP
SM Threads
Ø153.0
544.9
(21.5)
Figure 11.1: Pipe Mount Dimensions
1. Use the four (4) holes in the flange as a template to mark the position where the holes
should be drilled to secure the mount.
Figure 11.2: Mark Flange Holes
2. Drill the four (4) holes in the installation location, screws not supplied, use a minimum
screw length of 10 mm (.39 in.).
!
Caution!
All wires for installation applications must be routed through a grounded conduit.
3. Drill a fifth hole (maximum of 20 mm [.79 in.]) in the center of the four-hole pattern used
to mount the flange. Use this hole to feed the wires through the mount.
4 Fit the flange (supplied) to the pipe.
4 Select the pipe length of 200 mm (7.9 in.), 300 mm (11.8 in.), or combine the two (2)
pipes with the integral coupler for 505 mm (20 in.).
4 Fit the dome cap to the bottom of the pipe.