Bosch Autodome IP 4000 HD, Руководство по установке

Страница: 24 / 57

24 en | Installing a Surface Mount and Camera AUTODOME IP 4000 HD
2015.11 | 1.1 | Installation Manual Bosch Security Systems
9 Installing a Surface Mount and Camera
9.1 Tools Required
– Appropriate straight slot screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
– One (1) ground
– One #10 screw to attach the ground lug
9.2 Installation Requirements
– The ceiling is thick enough to install the mounting screws.
– The ceiling can sustain at least eight (8) times the weight of the camera (1.88 kg (4.14
lb)): > 15 kg (33 lb).
9.3 Preparing the Surface Mount for Installation
1. Determine the side of the surface mount adapter (NEZ-A4-SMB) from which the external
cables are to be routed. Remove the plug from the appropriate hole in the side of the
adapter (item a in the following figure).
2. Attach a ground wire (user-supplied) to the stand-off on the inside of the adapter with
the ground symbol (item b in the following figure) with a #10 screw (user-supplied).
3. Attach the flat, round end of the safety tether (supplied with the camera) to the stand-off
on the inside of the adapter (item c in the following figure) with the #10 screw
(supplied).
a
b
#10
c
#10
NEZ-A4-SMB
Figure 9.1: Prepare the surface mount adapter