Bosch AutoCook MUCP868BCN, Инструкция по эксплуатации

Страница: 45 / 57

45
en Child lock
[ ] (recipe 1) /
[ ] (recipe 2) –
saving personal preparation
programmes
Personal preparation programmes with
customised time / temperature and steam
pressure function can be saved under the
memory locations [
] (recipe 1) and
[ ] (recipe 2).
Notes:
■
If you have not previously saved any
personal preparation programmes, the
display does not show any values.
■
In order to switch on the steam pressure
function, the pressure locking handle
must be closed (
N
).
1. In function selection mode, press
button
D
once.
The LED [ ] (recipe 1) lights up. The
pre-configured preparation time is shown in
the display.
Saving the preparation time:
2.
Press button
F
once.
The display flashes. LED 1 (preparation step
1) lights up in the control panel.
3. Keep pressing button
F
until the desired
preparation time is displayed.
When button
F
is briefly pressed, the prepa-
ration time is increased by 1 minute. When
button
F
is pressed for a longer period, the
preparation time is increased by 10 minutes.
The time increases up to the pre-configured
maximum value and then returns to the
pre-configured minimum value.
Saving the preparation temperature or
steam pressure:
4. Preparation temperature:
Press
button
C
once. The pre-configured
preparation temperature is shown in the
display. Press button
C
repeatedly until
the desired preparation temperature is
displayed.
or
Steam pressure:
Press button
L
to
switch between [
K
] and [
L
].
5. Press and hold button
G
(>2 seconds)
to save the set values.
Note: Either the temperature or the steam
pressure can be set and stored for one
preparation step. The value last selected
is saved.
In order to programme other preparation
steps, repeat points 2 to 6. Up to 3
preparation steps can be programmed.
The saved preparation programme
[
] (recipe 1) can be selected as
usual via function selection mode.
Note: To save a second personal
preparation programme under
[
] (recipe 2), use the same process
as described above for [ ] (recipe 1).
To delete a personal preparation
programme, perform the following steps:
1. In function selection mode, press
button
D
once.
The LED [ ] (recipe 1) lights up.
The saved preparation time is shown in the
display.
2. Press button
F
once.
The display flashes. LED 1 (preparation step
1) lights up in the control panel.
3. Press and hold button
H
(>2 seconds).
The settings for [ ] (recipe 1) are
deleted.
Note: To delete the second
personal preparation programme
[
] (recipe 2), use the same process
as described above for [ ] (recipe 1).
Child lock
The child lock can be activated and deac-
tivated during a preparation process. If the
child lock has been activated, all buttons on
the control panel are locked and settings can
no longer be made on the appliance.
W
Warning
When the child lock is active, the preparation
processes cannot be changed or terminated.
The child lock must be deactivated first.
Press the following button combination:
1. Activate
Press and hold buttons
C
and
F
simultaneously for 3 seconds. A short
audible signal sounds. The child lock is
activated.