Bosch AutoCook MUCP868BCN, Инструкция по эксплуатации, Страница: 31 / 57

31
en Overview
Overview
X
Fig. A
1 Multi-cooker with steam pressure
function (basic appliance)
2 Lid
3 Control panel
4 Pressure locking handle
5 Steam release button
6 Removable steam outlet
7 Removable condensation tank
8 Opening button for the lid
9 Pan with non-stick coating
10 Pan handles
11 Mains connection
12 Carrying handle
13 Removable lid insert
14
Sealing ring
15 Safety valve
16 Steam valve
17 Overpressure protection
18 Mount for lid insert
19 Fastening screw
20 Steam release chamber
21
Steam valve opening with seal
22 White steam release lever
23 Valve plug
24 Manual unlocking for overpressure
protection
X
Fig. B
25 Frying basket with removable handle
26 Steamer insert, 2-part
27 Spatula
28 Ladle
29 Measuring cup
30 Mains cable with warning label
31 Operating instructions
32 Recipe book
Control panel
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. to select steam
pressure function, preparation temperature /
time). The settings are indicated via the
illuminated LEDs and/or the display.
Controls
X
Fig. C
B
Standby
Switches from standby mode to
function selection mode and back
again.
A
Set the start time delay
The start time delay can be set for the
selected preparation programme.
D
Select a preparation programme
from the list (h)
The individual preparation
programmes are displayed one after
another by repeatedly pressing button
D
. The corresponding LED lights up
in the control panel.
E
Adjust the preparation time
The pre-configured preparation time
[
] (medium) for a preparation
programme can be shortened
[
] (short) or lengthened
[ ] (long). The corresponding
indicator ( g ) lights up. The
corresponding pre-configured
preparation time is shown in the
display (
a ).
F
Set a customised preparation time
For customised adjustment of the
preparation time.
C
Set a customised preparation
temperature
For customised adjustment of
the preparation temperature. For
preparation programmes with
enabled steam pressure function, the
temperature is pre-configured (
f ) and
cannot be adjusted individually.
L
Steam pressure function
The steam pressure functions
“low steam pressure” [
K
] or
“high steam pressure” [
L
] are
selected by pressing button
L
. The
respective indicators ( f ) light up.
X
“Preparation with steam pressure”
see page 38
G
Confirm the programme
Pressing button
G
starts the selected
preparation programme.