Bosch AutoCook MUCP868BCN, Инструкция по эксплуатации

Страница: 41 / 57

41
en Additional functions
Note: The start time delay can only be set
for certain preparation programmes. The
pre-configured start time delay varies among
these preparation programmes.
1. Select the preparation programme.
2. Press button
A
. Button
G
flashes.
“00:10” flashes in the display.
Press button
A
repeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button
A
for around 2 seconds
increases the time by 30 minutes.
3. Press button
G
when the desired start
time delay is displayed.
The desired start time delay is shown in the
display. [
] (start delay) lights up in
the display.
The time until the start counts down. Once
this time has elapsed, the preparation
process starts automatically.
Notes:
■
The start time delay can be switched
off at any time by pressing button
G
.
The preparation programme then starts
immediately.
■
If “00:10” does not flash in the display,
a start time delay cannot be set for the
selected preparation programme.
Multiple preparation steps
Certain preparation programmes can consist
of several preparation steps. An audible
signal sounds once the next step is required.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button
G
flashes.
■
Open the lid of the appliance.
■
Add additional ingredients.
■
Depending on the recipe, refer to the
preparation method (e.g. with or without
steam pressure function, open lid).
X
S ee recipe book provided
■
Start the next preparation step using
button
G
.
The appliance heats up the appliance interior
until the target temperature or the selected
steam pressure of the next preparation step
is reached.
During the heating phase, lines that light up
in a clockwise direction appear in the display.
Once the target temperature or selected
steam pressure is reached, the lines go out
and the next preparation time is shown in
the display. The preparation process starts
automatically. The preparation time counts
down.
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the step
can also be terminated manually.
1. To do this, press button
G
for at least
2 seconds.
This will terminate the current preparation
step. An audible signal will then sound as
usual once the next step can be carried out.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button
G
flashes.
2. Perform the next preparation step.
Keep warm function
Certain preparation programmes include the
keep warm function.
X
“List of preparation
programmes” see page 47
If the preparation programme features the
keep warm function, this is switched on auto-
matically once the dish is ready and keeps
the dish warm for up to 10 hours at 40°C
(pre-configured keep warm time depending
on the preparation programme). [
] (fin-
ished) and [ ] (keep warm) light up.
A rectangle lights up in the display (dotted
lines). The keep warm function can be ended
using button
H
. The appliance subsequently
switches to function selection mode.