Bosch AutoCook MUCP868BCN, Инструкция по эксплуатации

Страница: 51 / 57

51
en Special accessories
Special accessories
MAZ8BI
Stainless steel pan, polished, with a non-
stick coating and storage lid*; suitable
for the induction multi-cooker with steam
pressure function MUC88...
5-litre pan; dishwasher-safe; very robust pan; 3
mm thick; stainless steel polished exterior; non-
stick coating; lid* for the practical storage of food
in the pan, e.g. in the refrigerator
MAZ0FB
Frying basket
Stainless steel basket with removable handle for
easy handling; dishwasher-safe
*The storage lid is not supplied as standard with the appliance. It is only supplied with pans as a special
accessory. If an accessory is not included in the product package, it can be purchased via trade stockists or
customer service.
Troubleshooting
Problem Cause Remedy
The prepared meal is
half-raw. Filled beyond capacity. Do not fill the pan beyond the marking
[ 4.0 litres ]!
The ratio of the amount of water and
the ingredients is incorrect. Adjust the ratio of the amount of water and
the ingredients.
Foreign objects in the appliance
interior. Remove all foreign objects. Do not use
any water for this purpose!
The pan is deformed. Contact customer service.
Fault in the appliance.
Fault in the sensor.
The prepared meal is burnt. There is dirt underneath the pan. Thoroughly clean the pan and the
appliance interior.
The pan is deformed. Contact customer service.
Fault in the appliance.
Fault in the sensor.
The appliance boils over. Filled beyond capacity. Adjust the amount.
The temperature is too high. Reduce the temperature.
The selected preparation
programme requires the meal to be
cooked with the lid open. Open the lid of the appliance.
LED does not light up. The appliance is switched off. Switch on the appliance.
Fault in the power cord. Contact customer service.
The hotplate does not
function. Fault in the appliance. Contact customer service.
The hotplate is damaged.
Water is flowing out of the
appliance. The appliance features overflow
protection.
The condensation tank is full and
overflowing. Remove water from condensation tank.
Remove the pan and use a cloth to rub
the appliance interior dry. Ensure that no
water enters the appliance interior.