Bort 93410532, Руководство пользователя, Страница: 22 / 32

22
GB
1 . BORT GLOBAL LIMITED offers the 2-year warranty from the date of
sale for all its products . Professional and commercial tools are not cov-
ered by the warranty . Repair is only available for a fee in this case .
2 . Non-commercial use of the tools imposes limitations on the dura-
tion of its operation and restricts the intended usage to household
purposes only . The continuous operating time should not exceed 40
hours . In addition, 10-15 minute breaks are to be made after every 15
minutes of continuous operation . Ignoring this condition when using
the tools is a violation of the good operating practice (this provision
does not apply to pumps, generators, chargers and similar equipment) .
Subject to the above mentioned condition, the service life of the tools
is 5 years .
When you purchase a tool, a warranty card is issued (fields with a date
of sale, model, and serial number are mandatory, other fields can also
be completed) . Please keep the card together with the sales receipt
during the entire warranty period for presentation at the service cen-
tre .
Electric tools are only accepted for warranty repairs when assembled
with all removable devices and their fastening elements (bus bars, saw
blades, chains, knives, trimmer heads, injectors, sprockets, bolts, nuts,
and mounting flanges) in working condition .
3 . The following malfunctions are eliminated free of charge during
the warranty period:
• Damage to the instrument, caused by the use of low-quality mate-
rials
• Assembly defects due to the fault of the manufacturer .
4 . The warranty does not cover:
• Malfunctions of the tools caused by the failure to comply with the
operating instructions .
• Mechanical damage (cracks, chips, mechanical damage to power
cords, mechanical damage to the enclosure, etc .), damage caused
by exposure to aggressive environments and high temperatures,
damage induced by the ingress of liquids or foreign matter into
ventilation grids of the electric tools, as well as damage due to im-
proper storage (corrosion of metal parts, etc .) .
• Tools with defects which were caused by an overload (simultane-
ous failure of the rotor and stator), improper use (usage of blunt,
unsuitable, unbalanced, or improperly chosen replacement devic-
es), lack of maintenance or care, and use of the tools for purposes
other than the intended purpose (for example, for processing of
materials for which the tool is not intended, etc .), as well as by the
instability of electric power supply, exceeding the standards set by
EN 61000-3-2, EN 61000-3-3 . Among others, undeniable signs of an
overload include: changes in appearance, deformation or melting
of parts and components of the product, darkening or charring of
wire insulation under high temperatures .
• Wear parts and materials (carbon brushes, belts, rubber gaskets,
seals, guards, platforms, bus bars, gears, bearings, hubs, coil heat-
ers, pulleys, rollers, rods, lock buttons, etc .), components (gears,
shafts, bearings, rods, rollers, etc .) subject to deterioration due to
lubrication wear-out, as well as replacement devices (drill chucks,
SDS cartridges, platforms, collets, bus bars, flexible shafts, batter-
ies, battery chargers, etc .) and supplies (knives, saws, abrasives, saw
blades, drill bits, drills, lubrication, etc .), except in cases of mechani-
cal damage of the above mentioned products due to failures of the
electric tool which are covered by this warranty .
• Natural wear of the tool, its parts and components (wearing out of
the resource, severe internal or external contamination, wearing
out of the lubrication) .
• Tools that were unsealed or repaired during the warranty period by
persons or organizations who are not legally authorized to perform
these activities .
• Tools with removed, erased, worn out or changed serial numbers,
including cases when the data of the electric tool does not match
the data of the warranty card .
• Preventive maintenance of the electric tools, for example, cleaning,
washing, lubrication .
5 . Do not operate electric tools exhibiting failure symptoms (high
arcing, smell of burning, increased noise, severe vibration, uneven
rotation, loss of power) . Do not use the electric tools if there is any
mechanical damage to the power cord (cracks, chips, tears, binds), AC
plug, or the enclosure of the tool .
6 . During the warranty period, faulty parts and components of the
instrument are repaired or replaced free of charge . The Service Centre
reserves the right to decide whether such parts and components are to
be replaced or repaired .
If a failure or malfunction is recognized by BORT GLOBAL LIMITED as a
warranty case, then it can be removed according to our own choice by
repair or replacement of the defective tool . Replaced tools and parts
become the property of the Service Centre of BORT GLOBAL LIMITED .
7 . Guidelines for the preventive maintenance of electric tools:
Regular preventive maintenance (cleaning, washing, relubrication of
bearings and gearbox, replacement of fast wearing parts) is recom-
mended for the tools . Maintenance ensures perfect operation of the
electric tool during its entire service life cycle . The frequency of preven-
tive maintenance at rated load is determined according to the natural
wear of carbon brushes . Maintenance work is charged according to the
price list of the service centre . Any failures covered by the warranty and
detected in the course of maintenance are repaired free of charge . War-
ranted failures, which are detected by the diagnostics, are eliminated
as agreed by the parties according to the routine procedure .
Preventive maintenance does not extend the duration of the warranty
period .
Other claims, except for the above mentioned right for free remedial
measures, are not covered by this warranty .
8 . This warranty does not affect other legal consumer rights granted
by the applicable laws .
* Depending on the model .