BorMann Pro BSS1350, Руководство пользователя

Страница: 7 / 45

EN
WWW.BORMANNTOOLS.COM
7
ON/OFF switch - trigger switch
Press the trigger to turn on the sander and release it to turn off your sander.
For models equipped with an ON/OFF selector switch: Move the switch to the ON position in order to turn on the sander.
To turn off the sander move the switch to the OFF position
On/Off switch Lock button (continuous operation)*
Press the on/off trigger switch then the lock-on button, release the on/off trigger switch first and then the lock-on button. Your
switch is now locked on for continuous use. To turn off your sander press and release the on/off switch.
Variable speed selector*
Use the selector to increase or decrease the speed according to the material and sanding sheet specification to be used (also
possible during no load operation). Avoid prolonged use at very low speed as this may damage your sander’s motor.
Main operation
Disposal
The power tool, accessories and packaging should be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into
national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct
manner.
Replacing the rectangular sanding pad assembly (2 in 1 models with triangular and rectangular pads)*
Unscrew the lock knob (for some models; press the button of the sanding pad) to release the triangulated sanding pad.
Hook the two hooks of the rectangular sand tray assembly to the support wire of the base plate.
The holes of the self-adhesive sandpaper must be aligned with corresponding holes of the rectangular sanding pad and com-
pacted by hand.
Replacing the sanding pad
To replace the sanding pad, unscrew and remove the bolts that hold the sanding pad on the sander.
Remove the sanding pad and attach the new pad. Check the sanding pad by pulling it slightly to ensure that it has been placed
correctly. Be sure to attach the pad in the right direction.
Using the sander
The workpiece to be sanded must be secured. If it is small or it may move during sanding, it must be held in a vice or suitably
clamped.
Be sure to hold the sander firmly whilst it is on and apply it gently to the work, it may “kick” on first contact. Hold the sander
so that it is flat on the work and move slowly, preferably with a smooth, circular motion. Regularly check the condition of the
sanding paper and replace when worn for best results.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may
also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the sander is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
The dust extraction hood will only work if the sandpaper has holes that line up with the dust collection holes of the sanding
pad. If your sander is equipped with a dust extraction port, connect a dust collection vacuum system or an appropriate vacuum
cleaner.