bora PL 540, Инструкция по монтажу и установке

Страница: 21 / 67

21
Removal and cleaning of the grease filter
1.
First remove the cover. To achieve this, set
the cover to the central position and pull it
upwards out of the extractor unit.
2.
Now remove the adjusting wheel by pushing it
towards the centre of the extractor, turning it
clockwise by 90° and removing it in an
upward motion. Always take care not to drop
the adjusting wheel.
3.
Now remove the grease filter from the vent of
the extractor.
4.
Clean the grease filter in the dishwasher with
the air discharge openings facing down.
5.
Reinstall the components in the reverse order
after cleaning as shown in depictions 1-3.
Cleaning / maintenance of the extractor unit
Regular cleaning of the surface areas saves the hassle
of removing tougher stains later.
To clean the surface of the extractor unit, only use a
sponge or soft cloth, water and suitable cleaning
agents.
It is recommended to use agents with protective effect,
as the protection film protects the surface from
incrustation and damage.
Never clean withabrasivedetergents, sharp objects,
abrasive all-purposespongesorwirewool.
Do not use caustic detergents.
The extractor unit surface can be damaged due to
improper treatment or cleaning.
1
2
3
Maintenance and care
GB