EN
25
Installation
www.bora.com
1
1
1
1
1
2
2
3
3
5
6
4
4
7
8
9
12 13
11
10
Fig. 4.57
PKAS3/PKAS3AB connection diagram
[1]
Interface/control knob cable
[2]
Cooktop communication cable
[3]
Cooktop power supply cable
[4]
Power supply for each cooktop
[5]
PKAS3/PKAS3AB power supply cable (country-specific)
[6]
PKAS3/PKAS3AB power supply
[7]
Fan 2 power supply cable
[8]
Fan 2 control line
[9]
Home In connection cable
[10]
Power supply for external device
[11]
External device
[12]
Home In port
[13]
Home Out port
[M]
Fan 2
[S1]
External switch contact
Connecting the cooktop extractor to the power
supply
X
X
Connect the extractor system (PKAS3, PKAS3AB) power
supply cable and the control unit (PKA3/PKA3AB) power
supply cable respectively to the power supply.
X
X
Put the cooktop extractor into operation (see the Operation
chapter).
X
X
Check that all the functions are working correctly.
4.12 Basic configuration
When installation is complete, you must carry out the basic
settings (these settings can be changed at any time later on).
i
You can see precise instructions on the basic
configuration and all necessary information in the
Configuration menu chapter of the operating instructions.
X
X
Follow the instructions on the basic configuration (see
Operating instructions – “Configuration menu” chapter).
4.13 Initial operation
i
You will find detailed information on operating the BORA
Professional 3.0 system in the operating instructions (see
“Functions and operation” chapter).
X
X
Ensure that all appliances are connected correctly and
connected to the power supply (fused) prior to initial operation.
X
O
Exception: During initial operation, the kitchen fitter may use
a temporary power supply for the control unit in order to carry
out the basic configuration (e.g. using the site power supply
during the building phase).
X
O
The settings made are saved and will not be affected when the
system is disconnected from the mains.
X
O
The final mains connection to the appliances may only be set
up by certified specialists.
4.14 Function test
X
X
Carry out a thorough function test on all appliances.
X
X
In the event of error messages, see the “Troubleshooting”
chapter in the operating instructions.
4.15 Sealing the appliances
1
Fig. 4.58
Silicone sealant for flush installation
[1]
Black, heat-resistant silicone sealant
1
Fig. 4.59
Silicone sealant for surface mounting
[1]
Black, heat-resistant silicone sealant
X
X
Once all of the installation work and initial operation is complete,
seal the appliances all the way round (also between the cooktop
extractor and cooktop) with black, heat-resistant silicone sealant [1].
X
X
Make sure that no silicone sealant gets under the cooktop.
4.16 Handover to user
Once installation is complete:
X
X
Explain the main functions to the user.
X
X
Explain all safety-related aspects of operation and handling to
the user.
X
X
Affix the supplied nameplate to the back of these instructions.
X
X
Provide the user with the accessories and all accompanying
documents, which are to be kept in a safe place.
Содержание PKAS3AB
Страница 27: ...EN 27 Notes www bora com 6 Notes...
