bora PKAS3AB, Руководство по установке

Страница: 10 / 28

EN
10
Installation
www.bora.com
4.4 Assembly instructions
4.4.1 Safety clearances
X
X
Maintain the following safety clearances:
1
3
2
Fig. 4.3 Minimum distance
[1] Minimum clearance of 50 mm at the back from the worktop
cut-out to the rear edge of the workto
[2]
Minimum clearance of 300 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall.
[3] Minimum clearance of 600 mm between the worktop and the
wall unit.
4.4.2 Minimum installation dimensions
(standard set-up)
≥810
≥890
≥900
Fig. 4.4 Minimum installation dimensions for standard set-up
of PKA3/PKA3AB
Scope of delivery of PKA3/PKA3AB
Name Quantity
Operating and installation instructions 1
Cooktop extractor 1
Height adjustment plate set 1
Installation clamps 4
Control knob 1
Stainless steel grease filter 1
Filter tray 1
Maintenance tray 1
Cover flap 1
CAT 5e communication cable 1
Control unit 1
Power supply cable 1
Straight duct piece 1
Control knob cable – extractor (1000 mm) 1
Special scope of delivery only for PKA3AB
BORA Pro knob ring All Black PKR3AB (to give the
cooktops a more uniform appearance)
4
Tab. 4.1 Scope of delivery of PKA3/PKA3AB
Scope of delivery of PKAS3/PKAS3AB
Name Quantity
Operating and installation instructions 1
Cooktop extractor 1
Height adjustment plate set 1
Installation clamps 4
Control knob 1
Stainless steel grease filter 1
Filter tray 1
Maintenance tray 1
Cover flap 1
Power supply cable 1
Control knob cable – extractor (250 mm) 1
Special scope of delivery only for PKAS3AB
BORA Pro knob ring All Black PKR3AB (to give the
cooktops a more uniform appearance)
4
Tab. 4.2
Scope of delivery of PKAS3/PKAS3AB
4.3 Tools and aids
The following tools are required to correctly install the appliance:
X O
pencil
X O
tape measure or folding metre stick
X O
standard or cordless drill with Ø 50 mm Forstner bit
X O
black, heat-resistant silicone sealant
X O
slotted screwdriver
X O
size 20 Torx screwdriver
X O
size 10 Torx screwdriver (PKA3/PKA3AB only)