bora PKAS3AB, Руководство по установке

Страница: 15 / 28

EN
15
Installation
www.bora.com
X
X
Turn the curved duct piece [1] over.
X
X
Push the rotated curved duct piece [1] back onto the duct
piece adapter [2] until it clicks into place in the fastening lugs.
Fig. 4.22
Airflow to the left with the curved duct piece
X
X
Make sure that no air gap has formed between the
components.
X
X
Attach the holding plate.
4.7.3 Rotating the cover frame by 180°
i
To ensure correct orientation of the cover frame, this
must also be rotated by 180°.
Fig. 4.23 Removing the cover frame
X
X
Turn the cooktop extractor round and lay it carefully on a
soft surface (e.g. a blanket) with the visible surface facing
upwards.
X
X
Carefully remove the holding clamps (x 18) with a screwdriver.
2
1
Fig. 4.24 Removing the cover frame
[1] Cover frame
[2]
Cooktop extractor
X
X
Separate the curved duct piece [1] from the duct piece
adapter [2].
X
X
To do this, carefully prise the plug connection open with a
slotted screwdriver first.
X
X
Pull the curved duct piece [1] out.
X
X
If necessary, rotate the cover frame by 180° (see “Rotating
the cover frame by 180°”).
2
1
Fig. 4.20
Installing the straight duct piece
[1] Straight duct piece
[2] Duct piece adapter
X
X
Push the straight duct piece [1] onto the duct piece adapter
[2] until it clicks into place in the fastening lugs.
X
X
Make sure that no air gap has formed between the components.
X
X
Attach the holding plate to the duct piece adapter [2] with 2
screws only.
4.7.2 Airflow to the left (installation rotated
by 180°)
i
The PKA3/PKA3AB cooktop can be installed rotated by
180°, meaning that the air is channelled away to the left.
Airflow to the left with the curved duct piece
X
X
Separate the holding plate and the curved duct piece (see
“Airflow straight to the side”).
X
X
Rotate the cover frame by 180° (see “Rotating the cover
frame by 180°”).
2
1
Fig. 4.21 Turning the curved duct piece over
[1] Curved duct piece
[2]
Duct piece adapter