bora CG11UMEN-000, Инструкции по эксплуатации и монтажу

Страница: 25 / 32

EN
25
Cleaning and Maintenance
www.bora.com
X X
Put the pot holder straightly and evenly on the gas
cooktop.
X X
Put the gas burner into operation (see the Operation
chapter).
8.3.2 Cleaning the control knobs
X X
Ensure that the cooktop is switched off (see the Ope-
rating chapter).
X X
Clean only the control knob by hand.
X X
Pull off the control knob.
X X
Clean the control knob with a soft brush.
X X
Rinse the control knob well after cleaning.
X X
Allow the control knob to dry thoroughly.
X X
Re-insert the clean and dry control knob into the slot
after the cleaning is completed.
8.3.1 Cleaning of the gas burners
1
2
3
4
5
Fig. 8.1 Gas burner installation
[1] Burner cover
[2] Burner head
[3] Safety thermocouple
[4] Electrical ignition device
[5] Burner housing
Q Q
Do not clean the device until the gas burner has
cooled down to normal temperature after use.
Q Q
Clean the device only with normal hot rinse water and
a commercially available detergent by means of a soft
sponge or a normal dishcloth.
Q Q
Never scrape or scratch off cooking residues.
Q Q
Do not put the gas burner parts and the pot holder in
the dishwasher for cleaning.
X X
Remove the pot holder.
X X
Remove the burner cover [1] from the burner head [2].
X X
Remove the burner head [2] from the gas outlet valve
X X
Clean the burner parts.
X X
Put the burner parts back together again after
cleaning.
Q Q
The burner heads and burner covers must be comple-
tely dry before they are put back in place.
X X
Position the burner head [2] correctly on the gas out-
let valve.
X X
Make sure that the safety thermocouple and the elec-
trical ignition device are positioned in the correct
opening.
X X
Put the burner cover [1] straightly and evenly on the
burner head [2].
Q Q
The electrical ignition will not work if burner parts are
not put back in place correctly.