bora CG11UMEN-000, Инструкции по эксплуатации и монтажу

Страница: 11 / 32

EN
11
Device description
www.bora.com
Display panel Display Meaning
Power levels
Small
flame
Minimal gas output
Large
flame
Maximum gas output
0 position No gas output
Tab. 4.1: Significance of the power levels
Knob operation
The operating panel is equipped with two control knobs.
The control knobs are used to ignite the burner, switch
hobs on and off and regulate the relevant hob. To operate
the appliance, set the control knob to the corresponding
power level.
4.3 Functional principle
If a cooking zone is switched on, the flame generates
heat, which directly heats the bottom of the cookware.
The power levels can be continuously adjusted.
4.3.1 Suitable cookware
INFO The heating and heat through time for the
base of the cookware as well as the cooking
results are significantly influenced by the
structure and material of the cookware.
Cookware with this symbol is suitable for gas
cooktops.
Suitable cookware is made of:
Q Q
Copper
Q Q
Stainless steel
Q Q
Aluminium
Q Q
cast iron
X X
Adhere to the cookware dimensions in the table:
Burner position Recommended
pan diameter
Minimum
pan diameter
Normal burner 100-140 mm 100 mm
High-power
burner
200-220 mm 200 mm
Tab. 4.1: Pan diameters
4 Device description
Observe all safety and warning information during operation
(see the Safety chapter).
The cooktop has the following features:
Q Q
Front normal burner
Q Q
Back high-power burner
Q Q
Two control knobs
Q Q
Cast iron pan support
4.1 Structure
1 2
4 5 3
Fig. 4.1 Cooktop
[1] Front normal burner
[2]
Back high-power burner
[3]
Pan support
[4]
Control knob for the back hob
[5] Control knob for the front hob
4.2 Operating panel and operating
principle
1 2 3
Fig. 4.2 Operating panel
[1] Control knob for the back hob
[2] Power display
[3] Control knob for the front hob