10
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code
02 for PE-HD, 04 for PE-LD •
PVC
=Polyvinyl chloride •
PP
=
Polypropylene •
PS
= Polystyrene, Polystyrene foam •
O
=
Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates that
the product must not be disposed of in the dome-
stic waste at the end of its useful life. Instead, it
should be taken to your nearest designated collec-
tion point or recycling facility. Alternatively, check
with your retailer and return the product when
buying a replacement, on a one-to-one basis or as free of
charge in case the size is smaller than 25 cm. Appropriate
disposal promotes the recycling of parts and materials, as
well as helping to protect the environment and human
health. Under current legislation, strict penalties are enfor-
ced against those disposing of products illegally. For more
information about the collection of special waste, contact
your Local Authority.
SWITCH ON AND SWITCH OFF
To switch on, press the
POWER ON/OFF
button
②
. To
switch off, repeat the same operation. When you switch
on, the keyboard is set to operate with the
Acoustic
Gran Piano
sound, the
Fusion 1
rhythm and the song
Auspicious Day
.
DEMO - Demo song
The instrument has
60
pre-recorded songs.
The
DEMO
button
㉑
plays all 60 songs in sequence.
Press DEMO again to stop the song.
When a song is playing, press
+/–
④
to select the next
or previous one, or enter a number from
0
to
59
⑱
to
select one from the list at the end of this manual;
2. MAINS SUPPLY
This instrument can be powered by a mains adaptor
(not included) with the following characteristics in
output: VDC =
5V
; I = 500 mA
(positive
central terminal). Insert the jack in the DC
5V
socket .
WARNING: All batteries or transformers with safety insulation
must be checked regularly for faults in cable, wire, or plug insu-
lation or other parts.
This instrument is only to be connected to
equipment bearing either of the following
symbols:
NOTE: Rating plate information was located at bottom enclo-
sure of the apparatus.
3. BATTERY SUPPLY
Use a screwdriver to open the battery compartment.
Insert
4 x 1.5 V batteries R6/AA
(not supplied), ensu-
ring correct polarity
(+/–)
. Re-fit battery cover.
Replace batteries when the quality of sound beco-
mes bad.
Use alkaline batteries to obtain a longer
duration
.
ATTENTION – BATTERY CARE
• Non-rechargeable batte-
ries are not to be rechar-
ged. • Rechargeable bat-
teries must be removed
from the toy before being
charged. • Rechargeable
batteries are only to be
charged under adult
supervision. • Different
types of batteries or new
and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted
with correct polarity. • Remove exhausted batteries to pre-
vent leakage. • Do not short-circuit supply terminals. •
Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentio-
ned here below, please refer to Council Administration office
regarding specialised waste collection centres.
1. POWER SUPPLY: USB-DC CABLE
The instrument can be
powered by a power bank, PC,
phone charger, etc. with the
USB-DC cable supplied
.
Insert the jack in the DC
5V
socket.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of batteries in the
special containers provided for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated
board to the appropriate waste collection
centres. Plastic material must be placed in the relevant col-
lection containers.
The symbols indicating the various types of plastic are:
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
E N G L I S H
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
