BONFIGLIOLI ACTIVE ACT2 Series, Быстрый старт

Страница: 94 / 258

92
Quick Start Guide ACT
12/20
GB
8 Technical data
CAUTION
Device defect and motor defect
The recommended motor shaft power indicated in the technical
data applies to IE1 motors only. Ignoring the possible DC-link
currents may decrease the motor product life and may damage
the inverter.
•
Always verify the applicable operation parameters with
regard to the particular motor type and inverter type
combination.
• Adapt software parameters if necessary.
General technical data (may differ for some sizes)
Output, motor side
Output voltage U V
eff.
Maximum input voltage, three-phase
Protection - - Short circuit / earth fault proof
Rotary field frequency f Hz 0 ... 599, depending on switching frequency
Switching frequency f kHz 2, 4 (default), 8, (16)
Input, mains side
Mains frequency f Hz 45 ... 66
Mains voltage U V 320 ... 528
Ambient conditions
Coolant air temperature T
n
°C 0 ... 40 (3K3 DIN IEC 60721-3-3)
Storage temperature T
L
°C -25 ... 55
Transport temperature T
T
°C -25 ... 70
Rel. humidity - % 15 ... 85; not condensing
Mechanical
Form of assembly - - vertical
Ingress protection rating - - IP20 (EN60529)
If required by the customer, the switching frequency may be
increased if the output current is reduced at the same time. Comply
with the applicable standards and regulations for this operating
point.