BONFIGLIOLI ACTIVE ACT2 Series, Быстрый старт

Страница: 85 / 258

12/20
Quick Start Guide ACT
83
GB
6 Parameters
6.1 Description of parameters relevant to ACT
The parameters are partly set via the guided commissioning. The
following overviews refer to configurations
110
and
410
. For
additional configurations enabling setting of other parameters, refer
to the Operating Instructions.
6.1.1 Adjustable parameters
Adjustable parameters
No. Description Unit Explanation
28 Control Level -
These instructions describe the parameters on
Control Level 1. Higher control level parameters
are described in the Operating Instructions and
should only be set by expert users.
30 Configuration -
The basic function of the control inputs and
outputs as well as the assignment of the software
modules is selected by the configuration. The
selection is made during the guided
commissioning.
34 Program(ming) -
The factory settings of all parameters is restored
or a fault message is acknowledged (alternative to
signal at digital input SIND1).
369 Motor Type -
Selection of connected motor or transformer. The
selection is considered in the test of the entered
rated values and the guided commissioning.
370 Rated Voltage V
Enter the voltage indicated on the type plate of
the asynchronous motor.
371 Rated Current A
Enter the rated current indicated on the type plate
of the asynchronous motor for the selected circuit.
372 Rated Speed RPM Enter the motor speed indicated on the type plate
of the asynchronous motor at rated frequency.
374 Rated Cosine Phi -
Enter the cos(ϕ) value indicated on the type plate
of the asynchronous motor.
375 Rated Frequency Hz
Enter the rated frequency (at parameterized rated
speed) indicated on the type plate of the
asynchronous motor.
376 Rated mech.
Rated power
kW
Enter the power (in KW) indicated on the type
plate of the asynchronous motor.
400 Switching
frequency
Hz
Higher switching frequencies reduce the motor
noise, but reduce the output current (refer to
technical data in Operating Instructions)