BONFIGLIOLI Vectron Agile VABus/TCP, Руководство по связи, Страница: 30 / 72

NOTE
Before clicking on “Write IP settings”, make sure that you are connected with the right
frequency inverter. To check this, click on the “Wink” button. The connected frequency
inverter will flash for 10 seconds.
At the frequency inverter, you can activate a function which will send an e-mail in case of an error. In
addition, a short text can be entered and saved as the e-mail text. The required settings can only be
made via VPlus. VPlus will access the frequency inverter via a local service port (KP232) or an Ether-
net connection.
To configure the e-mail function, please refer to Chapter 7.4.2.2 “Email”.
To send an e-mail message, the frequency inverter needs various information. It must have its own e-
mail address from where the e-mail message is sent. For e-mail transmission, identification by the
SMTP server (user name and password) is required. The recipient of the e-mail message must be
known.
In addition, the local network must be connected to the Internet, i.e. Gateway and DNS server must
be entered correctly. If you have any questions or problems, please contact your local system admin-
istrator.
SMTP settings (examples):
SMTP server: smtp.provider.com
“From” address: inverter.drive1@company.com
User name:
drive1@company.com
Password:
password
Re-enter password
password
“To” address
service.drives@company.com
SMTP settings saved before can be viewed by clicking on the “Read SMTP settings”. The password will
not be displayed.
SMTP settings are applied to the module by clicking on the “Write SMTP settings”. When the SMTP
settings are written, you will be prompted to enter a password. The two input fields “Password” and
“Re-enter password” must contain the same character sequence. If no entry is made or the contents
of the two input fields are different, an error message will be displayed.
NOTE
•
All device settings are saved in the module and in the non-permanent memory
of the frequency inverter. Switching of modules from one frequency inverter to
another does not have an effect on the IP settings of the frequency inverter. A
PLC will remain connected with the right frequency inverter after switching of the
module.
•
SMTP settings are saved in the module only. Switching of modules from one
frequency inverter to another will result in malfunction:
o
No e-mail messages will be sent in case of an error.
o
Wrong recipient.
o
Wrong e-mail text.
For documentation, all settings can be saved in a file (type = *.eop).
30
Agile
VABus/TCP 12/13