BONFIGLIOLI Vectron AEC 401 Series, Руководство по эксплуатации

Страница: 78 / 90

78 Operating Instructions AEC 11/17
Error environment
No. Description Function
339 Isd/Reactive Current
Current component forming the magnetic flux or the calculated
reactive current.
340 Isq/Active Current
Current component forming the torque or the calculated active
current.
343 Analog input MFI1A
Input signal on multifunction input 1 in analog
Operation
mode
452.
346 Analog Output MFO1A
Output signal on multifunction input 1 in
Operation mode
550
– analog.
349
Repetition Frequency
Output
Signal at repetition frequency output according to
Operation
mode
550 – repetition frequency.
350 Status of Digital Inputs
Decimally coded status of the six digital inputs and of
multifunction input 1 in
Operation mode
452 – digital input.
351 Status of Digital Outputs
Decimally coded status of the two digital outputs and of
multifunction output 1 in
Operation mode
550 – digital.
352 Time since Release
The time of the error in hours (h), minutes (m) and seconds (s)
after the release signal:
hhhhh:mm:ss . sec /
10
sec /
100
sec /
1000
.
353 Heat Sink Temperature Measured heat sink temperature.
354 Inside Temperature Measured inside temperature.
355 Controller Status
The reference value signal is limited by the controller coded in
the controller status.
356 Warning Status The warning messages coded in warning status.
357 Int. value 1 Software service parameter.
358 Int. value 2 Software service parameter.
359 Long value 1 Software service parameter.
360 Long value 2 Software service parameter.
367
Application Warning
Status
The application warnings coded in warning status.
The
Checksum
361 parameter shows whether the storage of the error environment was free of errors (OK)
or incomplete (NOK).
Error environment
No. Description Function
361 Checksum Check protocol of the error environment.