BONFIGLIOLI Vectron AEC 401 Series, Руководство по эксплуатации

Страница: 21 / 90

11/17 Operating Instructions AEC 21
4.2 Special safety instructions on transport of heavy devices
WARNING
High weight and unusual center of gravity!
Tilting the device may result in death or serious injuries. Due to the size and weight of
the device, there is the risk of accidents during transport. The center of gravity may be
not in the middle of the device. The underside of the device, due to its design, cannot
support the frequency inverter.
 Take utmost care during transport in order to prevent damage and deformation.
Transport, attachment and lifting of loads may only be carried out by specially
instructed staff who are familiar with the work.
 Only use suitable transport and lifting equipment with sufficient carrying capacity.
The lifting cables/chains used must be able to carry the weight of the device. Check
the ropes or chains for damage.
 Wear appropriate safety clothing.
 When lifting the frequency inverter up ensure that it does not fall over, is displaced,
swings out or falls down.
 Before the device is lifted up, everybody must have left the work area.
 Before transport, make sure the transport path has sufficient carrying capacity.
 Do not step under suspended loads.
 Do not put the device down in upright position without providing a suitable
supporting structure.
4.3 Dimensions/weight
For information on the weight and dimensions of the device, refer to chapter “Technical
data”.
4.4 Transfer to place of installation
Transfer to the place of installation is done with the product in its original packaging. Devices as from size
7 must be transferred to the place of installation in horizontal position, rear-side down. A fork lift truck or
crane with crane fork can be used for transfer to the place of installation.
 Apply the fork in the middle of the transport unit.
 Secure the transport unit to prevent it from falling down and overturning.
 Lift the transport unit up carefully.
 At the place of installation, put the transport unit down on a level and bearing surface.